Capitol Coatings Polska Sp. Z o. o., Warszawa

The POLYASPARTIC technology means: 1. Rapid curing (from 5 to 120 minutes, depending on the formulation) 2. Can be successfully applied at surface temperatures from -30°C to 60°C 3. Very low viscosity?equivalent to water?which gives it outstanding wetting ability on a properly prepared concrete floor or very high viscosity (depending on formulation) 4. High film build (up to 18 mils in a single coat) 5. Bubble-free surfaces even at high humidity (although high humidity can speed up the cure time considerably) 6. Potlife of seconds (sprayable) and 5 to 120 minutes (hand applied) 7. UV stable so it will never turn yellow?and can provide UV protection to underlying coatings 8. Made with a high solids content (as high as 100%), which means low or no volatile organics (VOCs) during application ? totally safe at application process and after 9. The cured coating can handle temperatures up to 350°F (150°C) 10. Crystal clear and does not blush white from moisture in the concrete 11. Able to resist most stains, especially from oils and fats and even from heavy chemicals 12. High abrasion resistance ? higher than epoxy or urethane - comparable to classic polyurea 13. May be able to resist higher internal moisture vapor emission rates than some other non-breathing coatings ? although this is an issue that is currently being investigated. 14. The cured coat can be used (walking) within 2 hours after finishing the job. The full activity of the done area can be reached within 16 ? 24 hours with full mechanical, chemical and temperature resistance. Thus the repair and application of concrete area can be done within one day with bringing the area to service next day! We also can do floorings in traditional technologies. However, traditional does not mean "cheap". We are using the best quality materials. Sorry... We do not apply floors or anticorrosion layers twice. Once is enough! :-)